UM1670 Rev 4 31/32
UM1670 Revision history
31
8 Revision history
Table 8. Document revision history
Date Revision Changes
10-Sep-2013 1 Initial release.
04-Mar-2016 2
New revision to introduce STM32F429I-DISC1 additional CPN that
corresponds to Mbed-Enabled Discovery Kit.
Updated: Section : Introduction, Figure 1: STM32F429 Discovery
board, Section 5: Quick start, Section 6: Hardware layout, Figure 2:
Hardware block diagram, Figure 3: Top layout, Section 6.3:
Embedded ST-LINK/V2 (or V2-B), Table 5: Solder bridges, Table 6:
STM32 pin description versus board functions, Section 7: Electrical
schematics.
20-Sep-2017 3
Updated Section 6.9: TFT LCD (Thin-film-transistor liquid-crystal
display).
02-Jul-2020 4
Reshuffle of document to align with latest standards:
– Introduction to Quick start reordering
– Electrical schematics removed
–New Table 2: Codification explanation and Section 7:
32F429IDISCOVERY information
Updated:
– Figure 2, Figure 3, Figure 4, Figure 5, Figure 7, and Figure 8.
– Table 4: Jumper states
– Section 6.3.4: Using ST-LINK/V2-B to program/debug the
STM32F429ZIT6 on board and Section 6.3.5: Using ST-LINK/V2-B
to program/debug an external STM32 application for connector
CN2, and Table 6: Solder bridges for connector CN3.
– Section 6.7: USB OTG supported
– Gyroscope ST-MEMS I3G4250D.
To Next Page
Loading...
Need help?
General
