SM CODE SPI_SM_4
Error reporting Refer to CAN_SM_2
Fault detection time Refer to CAN_SM_2
Addressed fault model Refer to CAN_SM_2
Dependency on MCU configuration Refer to CAN_SM_2
Initialization Refer to CAN_SM_2
Periodicity Refer to CAN_SM_2
Test for the diagnostic Refer to CAN_SM_2
Multiple faults protection Refer to CAN_SM_2
Recommendations and known limitations
Important note: it is assumed that the remote SPI counterpart has an equivalent capability of
performing the checks described.
Refer to CAN_SM_2 for further notice
UM1845
Description of hardware and software diagnostics
UM1845 - Rev 4
page 41/108
To Next Page
Loading...
