Stairmaster 4G - Page 39

Page 39
Fig. 48
Maintenance Mode TM (default values shown)
MAINTENANCE MODE
While in Maintenance Mode, the following information can be accessed and/or modified:
• SW versions - The latest software version loaded in the system.
• Serial Number - The last five digits of the display serial number.
• Model - The product type (treadmill, bike, etc.).
• Units - The units of measurement (English or Metric).
• Language - The language that the messages are displayed in.
• Max Time - The maximum time allowed for a single workout.
• Weight - The default user weight used for Quick Start programs.
• Oper Hours - The cumulative amount of usage hours.
• Dist Logged - The cumulative distance logged.
• Pause Time - Allows the manager/owner to select the length of the pause (30, 45, 60, 90, or 120 sec-
onds).
• Auto Fan - Allows the manager/owner to select the Auto Fans Functionality (ON or OFF).
• Lock Out - Allows the manager/owner to select the Lock Out Function (ON or OFF).
• Lock Out ID - Allows manager/owner to set a password for the Lock Out feature.
• Max Speed (TM Only) - English (From 5.0 to 15.0) or Metric (From 5.0 to 24.1).
• Accel Time (TM Only) - Allows the manager/owner to set the AccelerationTime of treadmill (From 25 to
60 seconds).
• Decel Time (TM Only) - Allows the manager/owner to set the DecelerationTime of treadmill (From 20 to
60 seconds).
• Club ID - Allows the manager/owner to set a Club ID.
• PPD Enable (TM Only) - Allows the manager/owner to select the Person Present Detect function
• PPD Timer (TM Only) - Allows the manager/owner to set the Person Present Detect detection timer of
treadmill (From 20s to 60s).
• WD Enable (TM Only) - Debugging use only