Stairmaster 4G - Assembly; Whats in the Box; Required Tools

Page 9
WHAT’S IN THE BOX
E
L
B
H
C
A
I
P
F
N
G
O
J
K
M
D
Fig. 4
What’s in the Box
# PN Description
A 020-8110-XX ASSY, SHROUD, PLASTIC, SIDE, TOP, RADIAL, R, W/ CLIP, 4G
B 020-8111-XX ASSY, SHROUD, PLASTIC, SIDE, TOP, RADIAL, L, W/ CLIP, 4G
C 020-8112-XX ASSY, SHROUD, PLASTIC, CENTER, REAR, W/ CLIPS, 4G
D 020-8113-XX ASSY, SHROUD, PLASTIC, CENTER, FRONT, W/ CLIP, 4G
E 020-8119-XX ASSEMBLY, NECK SHROUDS, 4G
F 020-8146-XX CLAMP, R25, M8 C-BORE HOLE, SM
G 020-8147-XX CLAMP, R25, M8 THREAD HOLE, SM
H 050-5885 ASSEM., CRATE, PACKAGING, 4G SM
I 711-4036-XX ASSY, BASE W/ COMPONENTS, 4G
J 711-4046-XX ASSEM., HANRAIL BASE, W/RING, 4G
K 711-4107 KIT, DOCUMENTATION, 4G SM
# PN Description
L 711-4136-XX ASSEM., NECK, W/WIRING & LABELS, 4G
M 711-4137 ASSEM., FULL HANDRAIL, R, 4G SM
N 711-4138 ASSEM., FULL HANDRAIL, L, 4G SM
O 711-4154 KIT, SM, POWER INPUT ACCESORIES
P 711-4155 KIT, HARDWARE PACK, 4G SM
REQUIRED TOOLS
• 6mm Allen Key
• 13mm Socket
• Ratchet Wrench
• 13mm Open-Ended Wrench
• #2 Phillips Head Screwdriver
ASSEMBLY
To watch the installation video of this unit scan or visit:
QR.COREHANDF.COM/4GINSTALL