Page 16
17. Connect the heart rate cables
711-4139 and Speed keypad
cable 711-4140 coming from the
left handrail to the receiving cables
coming from the hole in the rear of
the mast 711-4135-XX.
18. Connect the heart rate cables
711-4139 and Stop keypad cable
711-4141 coming from the right
handrail to the receiving cables
coming from the hole in the rear of
the mast 711-4135-XX.
Heart Rate from
Right Handrail
Stop Button from
Right Handrail
Speed +/- from
Left Handrail
Heart Rate from
Left Handrail
Speed +/-
From Mast
Stop Button
from Mast
Left Heart Rate
from Mast
Right Heart Rate
from Mast
Fig. 15
19. Fully tighten all hardware from
Steps 11, 12, 7, 14, 15 and 16.
TORQUE VALUES:
Steps 7, 14, 15 and 16:
35-40 NM (25-30 FT-LB)
Steps 11, 12:
42-46 NM (31-34 FT-LB)
110-4229 020-8112-XX
Fig. 16
20. Use a #2 phillips head screwdriver
to secure the front shroud to the
frame using two (2) pieces of the
M5x30mm pan head machine
screw 110-4229.
To Next Page
Loading...
