Page 84
With durable, high performance components, this equipment is designed for heavy usage with minimal
maintenance required. To keep it in top condition, perform regular daily, weekly and monthly preventive
maintenance routines outlined below.
The safety and integrity of this machine can only be maintained when the equipment is regularly examined for
damage and wear and repaired. It is the sole responsibility of the owner of this equipment to ensure that regular
maintenance is performed. Worn or damaged parts must be replaced immediately or the equipment removed
from service until the repair is made.
Daily Weekly Monthly Bi-Annually
General Maintenance
Check Safety & Warning Labels X
Spot Check Step Chains X
Lubrication
Drive Chains
1
OR EVERY
300 HOURS
Pillow Block Bearings
2
& Bearing Plates
3
X
Bearing Plates
Cleaning
Clean Console
4
X
Clean Side Covers
5
X
INSPECTION
Inspect the frame for any rust, bubbling, or paint chips during the daily cleaning. The salt in perspiration
can damage the unpainted surfaces. Repair the damaged area with a touch-up paint kit purchased from
StairMaster® (see Support & Service for order information).
CAUTION: Cleaning products may be harmful/irritating to your skin, eyes, etc. Use protective gloves and
eye protection. Do not inhale or swallow any cleaning product. Protect surrounding area/clothing from ex-
posure. Use in a well-ventilated area. Follow all product manufacturer’s warnings. CORE Health and Fitness
cannot be held responsible for damage or injuries resulting from the use or misuse of cleaning products.
Preventive Maintenance Cautions
• While maintaining equipment you will want to avoid spraying any liquids directly onto any surface of the
unit. Always spray cleaning solutions onto a clean towel first then wipe the unit.
• Do not use glass cleaners or any other household cleaners on the console. The console should be
cleaned with a damp cloth and dried on a daily basis. Cleaning solutions can be made of a 5:1 dilution
ratio, where 5 parts water are mixed with 1 part of Simple Green®, Fantastik®, or 409®. Do not spray
water, or cleaner directly onto console USB Port.
1 Non-Silicone Tri-Flow Oil (spray can recommended) or other PTFE oil.
2 Multi-Purpose Grease
3 4G, 8G, and 8Gx Only, Marine Grease
4 Clean with a water dampened cloth & wipe dry after cleaning.
5 Clean exterior with soap and water or a diluted household cleaner.
To Next Page
Loading...
