Stanley K1200 Installation And Operating Instructions

12
6.1 K1200 Assembly of removable parts
Installing the Casings
Before installing the casings, you should check if the package is complete and in good condition. Any possible damage or missing
elements should be reported before proceeding with the installation.
This section describes how to install the casings for the k1200 Stove.
To install the casings, the installer must have available:
Figure 9 Material required to install the casings
IMPORTANT NOTICE: Before installing the casings, it is required that the unit is electrically isolated (unplugged ).
To assemble some of this models, each kit must include the following parts
K1200 (Claret, White or Black) K1200, 12kW Oak
Figure10 , 12kW Colours. Figure 11, 12kW Oak.
The covers should be placed on the pillars and grille slots identified in Figures 12& 13. The screw placed in the stove body must
be removed and tightened after placing the side cover as shown in Figure 14.
Figure 12 Figure 13
Figure 14 screw to secure covers
Star shaped
screwdriver
PH2 screw

Stanley K1200 Specifications

General

Brand	Stanley
Model	K1200
Category	Stove
Language	English