29
Note: See the warning label and read the maintenance instructions in chapter 12.
11.2 Weekly Maintenance K1700 & K2300.
To perform maintenance on the boiler model pellet stove, clean the airflow pipes. To do this, raise the lid on the top of the
stove (Figure 29-a) and then turn (Figure 29-b) and lift the levers inside several times (Figure 29-c) to make the dirt accumulated
inside the pipes fall out.
a) b)
c)
Figure 29 – Cleaning the turbulators
Then clean the inside of the stove using a steel brush on the surfaces where dirt has accumulated (Figure 30).
a) b)
Figure 30 – Cleaning the interior of the boiler model
To Next Page
Loading...
