33
If flue gases are not being extracted properly, we recommend you clean heat exchanger and the extractor as shown in Figures
37and 38. However, we recommend that you perform this procedure at least once a year.
a) b)
Figure 37 – a) Remove the screws; b) Remove the extractor
Figure 38 – Vacuum the air flow pipes
11.5 Cleaning the glass
The glass may only be cleaned with the stove completely cold, and using an appropriate product, as per the instructions for
use. You should prevent the product from reaching the sealing ring and painted metal parts so that no undesirable oxidation
occurs. The sealing ring is glued, so should not be exposed to moisture from water or cleaning products.
Figure 39 – Incorrect cleaning of the glass
a) b)
Figure 40 – Cleaning of the glass: a) moisten a soft cloth with liquid; b) clean the glass with the cloth
To Next Page
Loading...
