23
This operation is only available in automatic mode.
To activate the eco mode, press "set". The display starts to flash. Select "On" or "Off" using the "-" and "+" keys. Press "set" to
confirm the selection.
Press "esc" to return to the previous menu and "+" to go to the (Lighting) menu.
· Lighting
To select lit screen, press “set”. The display starts to flash. Press the "+" or "-" key to select the time at which you want the
screen to light up, or choose "On" to keep the light on at all times. Press "ok" to confirm. Press the "+" key to go to the (Tones)
menu.
· Tones
To activate the key tone, press "set". The display starts to flash. Press the "+" or "-" key to select "On" or "Off". Press "ok" to
confirm. Press the "+" key to go to the "ºC/ºF" menu.
· Temperature stove (ºC/ºF)
To select ºC / ºF, press “set”. The display starts to flash. Press the “+” or “-” key to select “ºC”, “ºF” or “Auto”, and then “ok” to
confirm. Press the "+" key to go to the " Pellet" (Pellet Qty) menu.
· Pellet quantity
Press "set" to see the "(Temporary settings) menu.
- Temporary settings
This feature allows you to increase or decrease by 25% the quantity of pellets at start- up. Press "set". The display starts to
flash. Press "+" or "-" to increase or decrease (between -5 to +5), accordingly. Each stove must be multiplied by 5 to obtain
esc Off Set
< Eco >
<
To Next Page
Loading...
