43
Maximum head (m) Configuration
2-4
3-5
4-6
5-7
Table 2 – Pump settings
Alarms
If the pump detects one or more errors, the LED 1 changes from green to red when the alarm is activated the yellow LED indicates
the type of alarm (see Table 6), if we have several alarms at the same time, the yellow LED indicates the alarm with higher priority,
the priority sequence is defined on table as follows:
Display Priority Alarm action
LED 1 red + LED 5 yellow
1 Rotor is blocked Wait or deblock the shaft
LED 1 red + LED 4 yellow
2
Supply voltage too
low
Control the supply
voltage.
LED 1 red + LED 3 yellow
3
Electrical error
Control the supply
voltage or replace the
pump.
Table 3 – Alarms
To Next Page
Loading...
