Controller Functions and Connections
QB Expert Alpha Controller
4
1.2 Controller Functions and Connections
This table refers to the picture on the previous page.
Item Number Functional Description
1 Red, Green, Yellow LEDs for Limits Evaluation
2 Programmable and Tool Ready LEDs
3 Display
4 Function Keys with Active Label Above
5 Maintenance Due Indicator
6 Cursor Keys with Center Button to Expand Lists
7 Numeric Keypad to Enter Numbers or Select Options
8 Power Switch
9 Alpha Toolbox Connector
10 USB Port for Data Transfer
11 Tool Connector
12 Plant/ Spindle Network Ethernet Connectors
13 Optional Master DeviceNet Connector
14 Serial Connector
15 Optional Profibus or DeviceNet Connector
16 Power Input
17 19-Pin, 24V DC Input/Output Connector
18 Optional Fieldbus Ethernet Connectors
19 Indicates WiFi Enabled (when present)
Information about these items is discussed elsewhere in this manual. Use the Table of Contents to find the page
for the item of interest. If this is an electronic document you are reading click on the item in the Table of Contents
and it will link you directly to the page. Or press CNTRL+F on the keyboard to search the document for the item
of interest.
1.3 CE Directives (Europe)
STANLEY Engineered Fastening Assembly Technologies declares that the QPM QB Expert Alpha controller
conforms to all the applicable regulations of the Machinery Directive. See the CE Declaration of Conformity that
is delivered with each QB Expert Alpha controller.
1.3.1 Machinery Directive Compliance
This product complies with the requirements of the European Machinery Directive (2006/42/EC). See the CE
Declaration of Conformity that is delivered with the product.
To Next Page
Loading...
Need help?
General
