Stanley QB Expert User Manual

Programming
Instruction Manual
59
Server IP Type the IP Address of the Toolsnet server on the network.
Port
The required virtual port on which to communicate this protocol. For the Expert Alpha
controller it is normally 6575.
System Type the cell number where this Alpha controller resides.
System Name Type the system number where this Alpha controller resides.
Station Type the Station number where this Alpha controller resides.
Station Name Type the Station name where this Alpha controller resides.
Trace
Selects the types of traces that are sent to the server.
None No traces are sent to the server.
All All traces are sent to the server.
OK Only OK fastening cycle traces are sent to the server.
NOK Only NOK fastening cycle traces are sent to the server.
Use the right arrow to move to the next tab or press EXIT to save the changes and return to the Run screen. See
section “3.1.2.6 Exit” on page 52.

Stanley QB Expert Specifications

General

Brand	Stanley
Model	QB Expert
Category	Controller
Language	English