Star Micronics TSP100LAN - 5. Thermal Roll Paper Specification; 5-1. Roll paper specification

– 17 –
5. Thermal Roll Paper Specication
When consumable parts have run out, use those specied below.
5-1. Roll paper specication
ermal paper
ickness: 65~85
µm (excluding Mitsubishi HiTec F5041)
Width: 79.5±0.5 mm (57.5±0.5 mm when the paper roller holder is used)
Outer roll diameter: ø83 mm or less
Take up paper roll width: 80 mm or (58 mm when the paper roller holder is used)
Core outer/inner diameter
Core outer Core inner
ø18±1 mm ø12±1 mm
Printed surface: Outer edge of roll
Tail end handling: Do not use paste or glue to secure the roll paper or its core.
Do not fold the tail end of the paper.
5-2. Recommended paper
Note: 1) e print density may vary depending on the type of roll paper, operating environ-
ment, and power consumption mode.
2) A reader or scanner may not be able to scan a printed bar code or characters de
-
pending on the print density. Make sure that your reader or scanner is able to scan
correctly beforehand.
Manufacturer Product name Quality characteristics/Use Paper thickness (µm)
Mitsubishi Paper
Mills Limited
P220AG normal type paper 65 (thickness)
HP220A high image stability paper 65 (thickness)
HP220AB-1 high image stability paper 75 (thickness)
P220AGB normal type paper, card ticket 80 (thickness)
PB670 2 color paper: Red & Black 75 (thickness)
PB770 2 color paper: Blue & Black 75 (thickness)
Mitsubishi HiTec Paper
Flensburg GmbH
F5041 normal type paper 60 (thickness)
Oji Paper Co., Ltd.
PD150R normal type paper 75 (thickness)
PD160R high image stability paper 75 (thickness)
PD170R high image stability paper 75 (thickness)
PD190R middle image stability paper 75 (thickness)
PD750R 2 color paper: Red & Black 75 (thickness)
PD700R 2 color paper: Blue & Black 75 (thickness)
Nippon Paper Industries TF50KS-E2D normal type paper 65 (thickness)
Kanzaki Specialty
Papers Inc. (KSP)
P320RB 2 color paper: Red & Black 65 (thickness)
P320BB 2 color paper: Blue & Black 65 (thickness)
+ 0.5
-1
+ 0.5
-1
Note: Access the following URL for the information of the recommended paper.
http://www.star-m.jp/eng/dl/dl02.htm