Star Micronics TSP100LAN - Auto Cutter Specifications; Ethernet Interface; Electrical Characteristics

– 28 –
10-4. Electrical Characteristics
(1) Input Voltage 100 to 240 V AC, 50/60 Hz
(2) Current Consumption Operating: Approx. 40 W (at ASCII printing)
Stand-by: Approx. 6 W
10-3. Ethernet Interface
(1) General Specication Conforms to IEEE802.3 / Conforms to IEEE802.3u
(2) Communication Media 10 Base-T / 100 Base-TX
(3) Communication Speed 10 / 100 Mbps
(4) Protocol TCP/IP v4
(5) TCP/IP detail ARP , IP , ICMP , TCP , UDP , DHCP , LPR , #9100 , SDP ,
TELNET
(6) Connector RJ-45 (8-pin modular)
Pin No. Signal name Function
1 TX+ Transmit Data +
2 TX- Transmit Data -
3 RX+ Receive Data +
4-5 - -
6 RX- Receive Data -
7-8 - -
(7) LED Display
Green Lights when other party connection is recognized as 100BASE-TX.
Red Lights when packets are received.
18
LED
10-2. Auto Cutter Specications
(1) Cutting frequency Max. 20 cuts per minute
(2) ickness of paper 65~85
µm