Star Micronics TSP100LAN - 6. Control Panel and Other Functions; 6-2. Errors

– 18 –
6. Control Panel and Other Functions
6-1. Control Panel
1
READY lamp (Green LED)
1
READY lamp (Green LED)
Lights up when the printer is properly con
-
nected to the network.
2
ERROR lamp (Red LED)
Indicates various errors in combination
with POWER lamp.
3
FEED button
Press the FEED button to feed roll paper.
6-2. Errors
1) Automatically recoverable errors
Error Description READY Lamp ERROR Lamp Recovery Conditions
Head high temperature
detection
Flashes at 0.5-second
intervals
O
Automatically recovered aer
the print head has cooled.
Board high temperature
detection
Flashes at 2-second
intervals
O
Automatically recovered aer
the board has cooled.
Cover open error On
Automatically recovered aer
the printer cover is closed.
2) Non-recoverable errors
Error Description READY Lamp ERROR Lamp Recovery Conditions
Head thermistor error
Flashes at 0.5-second
intervals
Flashes at 0.5-second
intervals
Non-recoverable
Board thermistor error
Flashes at 2-second
intervals
Flashes at 2-second
intervals
Non-recoverable
VM voltage error
Flashes at 1-second
intervals
Flashes at 1-second
intervals
Non-recoverable
VCC voltage error O
Flashes at 1-second
intervals
Non-recoverable
EEPROM error
Flashes at 0.25-second
intervals
Flashes at 0.25-second
intervals
Non-recoverable
CPU error O O Non-recoverable
RAM error O On Non-recoverable
3
FEED button
2
ERROR lamp (Red LED)
Note:
1. If a non-recoverable error occurs, turn the power OFF immediately.
2. If a non-recoverable error occurs, please consult the dealer for repairs.