14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Do one of the following:
• To select the previous computer, press the up arrow key.
• To select the next computer, press the down arrow key.
3. To stop the manual scan, press any key.
Disabling the Audio Stick Feature
By default, the Audio Stick feature is enabled on the KVM
switch, which means that the audio selection is determined
by the computer that is currently selected. For example, if you
switch to computer 2, the audio selection changes to computer
2.
You can disable the Audio Stick feature and make the audio
selection independent from the computer that is currently
selected. For example, if you select computer 1 and then switch
to computer 2, the audio selection remains with computer 1
until you change it.
• Press Left Ctrl, Left Ctrl, F5. The KVM switch beeps once to
indicate that the Audio Stick feature is disabled.
Note: To enable the Audio Stick feature, press Left Ctrl,
Left Ctrl, A. The KVM switch beeps twice to indicate that the
Audio Stick feature is enabled.
To Next Page
Loading...
Need help?
General
