Steinberg CMC Series User Manual

CMC-PD Editor
CMC Series Operation Manual 24
[NORMAL]
This allows you to confirm the MIDI note number
assigned to each pad of the Normal mode. Editing is
also available for banks 1 – 8.
1 [BANK] (Bank Select button)
Click the bank number to select a desired bank for
editing ([1] – [8]) / display purpose ([9] – [16]). The
currently selected bank number is highlighted.
2 Pad
The pads of banks 1 – 8, for which editing MIDI note
numbers is allowed, and that of banks 9 – 16 (display
only), are explained separately.
The pads of banks 1 – 8
Displays/edits the currently assigned MIDI note
numbers. The editing procedures are described below.
1. Use either one of the following two methods to
select the pad.
• Click a pad in the editor window.
• Operate a device’s built-in pad.
2. Use any of the following to edit the MIDI note
number.
• Mouse wheel
• Computer Keyboard cursor key
• Direct input
• U/D click
• Virtual keyboard
• The device’s knob
The MIDI note number range is C-2 to G8. If you hold
down a device’s built-in pad and edit the value of the
corresponding pad in the editor window, you can
immediately check the sound of the MIDI note number
set.
The pads of banks 9 – 16
The pads of banks 9-15 display the assigned MIDI note
numbers. The pads of bank 16 display the function
numbers.
3 Virtual Keyboard
Indicates the virtual keyboard corresponding to the MIDI
note number assigned to the pad selected. You can also
change the MIDI note number by clicking the keyboard.
1
2
3
Example pad of banks
9 – 15
Example pad of bank
16

Steinberg CMC Series Specifications

General

Brand	Steinberg
Model	CMC Series
Category	Controller
Language	English