100
Voltage
Introduction
Voltage is a two-oscillator and noise synthesizer that can be used for synth basses,
but it also allows you to create any kind of classic monophonic and polyphonic synth
sound. With the integrated arpeggiator and step sequencer, you can create anything
from sequencer lines to stepped chords.
The two oscillators and the noise generator are followed by a 24 dB low-pass filter.
The filter can be modulated using modulation sources like the keyboard, velocity, and
LFO, but also by the controller lanes of the step sequencer, for example.
Voltage includes two LFOs for pitch, PWM, and filter modulations. The first LFO can
be synchronized to the tempo of the host application and allows for filter and pitch
modulation. The second LFO is controlled by the modulation wheel and is used to
create a vibrato.
The Oscillator Section
Oscillator 1/2 Waveform
Here, you can choose a waveform for the oscillator: saw, triangle, or square.
Oscillator 1/2 Level
Controls the level of the oscillators.
To Next Page
Loading...