159
Global Effects
HALion 3 Legacy Effects
HALion 3 Legacy Effects
In addition to the standard effects, a number of effects from HALion 3 is also
provided. These effects can be selected from the Legacy submenu of the Effects
menu.
Hall Reverb
A simple reverb with adjustable pre-delay and damping.
Non-Linear Reverb
A “gated” reverb with a sharp cutoff.
Early Reflections
A short, dense reverb for simulating small acoustic spaces and to thicken or blur
sounds.
Delay
A simple mono-in/stereo out delay.
Parameter Description
Predelay The Predelay time delays the wet signal to simulate larger
acoustic spaces or as a slap-back effect.
Time Length of reverb tail.
HF Damp Progressive damping of high frequencies.
Lo EQ Low-cut EQ.
Hi EQ High-cut EQ.
Mix Wet/dry mix.
Parameter Description
Time Length of reverb tail. It also allows you to change the sound
from dense early reflections to a trashy, grainy 80’s-type reverb.
HF Damp Progressive damping of high frequencies.
Lo EQ Low-cut EQ.
Hi EQ High-cut EQ.
Mix Wet/dry mix.
Parameter Description
Time Length of reverb tail. It also allows you to change the sound
from dense early reflections to a trashy, grainy 80’s-type reverb.
Low EQ Low-cut EQ.
High EQ High-cut EQ.
Mix Wet/dry mix.
Parameter Description
Delay Delay time. If the Sync parameter is set to On, the delay time is
set by using various note values.
Sync On/Off By activating Sync, delays are synced to the tempo set in your
host application.
Feedback Feedback controls the number of delay repeats.