103
Voltage
The Filter Section
Sustain
Sets the sustain level of the amplifier envelope.
Release
Sets the release time of the amplifier envelope.
Voice
Octave
Here, you can adjust the pitch in octave steps.
Pitchbend Up/Down
Here, you can set the range for the modulation that is applied when you move the
pitchbend wheel.
Glide
You can use this parameter to bend the pitch between two notes that follow each
other. You achieve the best results in Mono mode.
Fingered
Activate this parameter to glide the pitch only between notes that are played legato.
Mono
Activates monophonic playback.
Retrigger
When this option is activated, a note that was stolen is retriggered if you still hold the
stolen note when releasing the new one. This lets you play trills by holding one note
and quickly and repeatedly pressing and releasing another note, for example.
Trigger Mode
Defines the trigger behavior for new notes. The following settings are available:
Option Description
Normal Triggers a new note when the previous note is stolen.
Resume The envelope is retriggered, but resumes at the level of the stolen
note. The pitch is set to the new note.
Legato The envelopes keep playing. The pitch is set to the new note.
To Next Page
Loading...