125
World Percussion
Introduction
Loop
Defines whether the phrase is played once or continuously in a loop. When this is
activated, the phrase plays in a loop.
Hold
With the Hold parameter, you can prevent the phrase from stopping or changing
when the keys are released. In addition, the Gated mode plays silently in the
background when you release the keys, and resumes playback at the current position
when you press the keys again.
You can select one of the following options:
Trigger Mode
The Trigger Mode determines at which moment the player changes the phrase when
you select another variation.
You can select one of the following options:
Restart
Depending on the selected Restart mode and your playing, you can restart playback
from the beginning of the loop.
You can select one of the following options
Start
This parameter allows you to shift the start of the loop in steps of 1/4 notes. The
length of the loop is shortened accordingly.
Option Description
Off The phrase changes immediately when releasing a key. The phrase
stops immediately when releasing all keys.
On The phrase plays to end even when the keys are released. When the
Loop option is activated, the phrase plays continuously in a cycle.
Gated The phrase starts playback with the first key being played. It plays
silently in the background even when the keys are released, and
resumes playback at the current position when you press any of the
keys again. This way, you can gate the playback of the phrase.
Option Description
Immediately The phrase changes as soon as you switch to another variation.
Next Beat The phrase changes on the first new beat after switching to another
variation.
Next Measure The phrase changes on the first new measure after switching to
another variation.
Option Description
Off The loop runs continuously and will not restart upon note changes.
First Note The loop restarts when a note is triggered and no other notes are
already held.
Each Note The loop restarts each time a note is triggered.
Sync to Host Select this to align the loop with the beats and measures of your
host application. The loop aligns to the beats and measures each
time you start the transport.
Follow Transport Playback starts and stops automatically together with the transport
controls in your host application.
To Next Page
Loading...