193
MIDI Controllers
Using MIDI Controllers
Assigning MIDI Controllers to AUX FX
You can assign the parameters of the AUX FX to MIDI controllers as well. Unlike the
slots, the AUX FX do not have a MIDI port and channel of their own. Instead, they
listen to any incoming MIDI controller message regardless of the MIDI channel (omni
mode). Therefore, if you assign a parameter to a MIDI controller, you should use a
controller number which is not already in use by any of the assignments you made on
the slots.
• To assign a MIDI controller, load the effect, right-click the parameter and assign a
controller, as described above.
• If you unload or replace the effect, the MIDI controller assignment of this effect will
be lost.
Saving a MIDI Controller Mapping as Default
After customizing the factory MIDI controller assignments, you can save them as
default. Proceed as follows:
1. Go to the Options page.
2. Click “Save as Default” in the MIDI controller section.
Now, each time you load a new instance of the plug-in, your customized MIDI
controller mapping will be available as default.
Ö “Save as Default” does not include any of the MIDI controller assignments of the AUX
FX.
Ö The current MIDI controller mapping will also be saved with each project. This way,
you can transfer your settings to other systems. The project also includes the MIDI
controller assignments of the AUX FX.
Restoring the factory MIDI Controller Assignment
To restore the factory MIDI controller assignments, proceed as follows:
1. Go to the Options page.
2. In the MIDI controller section, click “Reset to Factory”.
3. Click “Yes” to restore the mapping or “No” to cancel.
Automation and Factory MIDI Controller Assignments
The following parameters on the plug-in interface are available for automation from
your host software and can be assigned to an external MIDI controller. The controller
numbers and names refer to the default factory MIDI controller assignment of these
parameters:
Ö The assigned MIDI controller numbers are the same for all 16 slots. However, the MIDI
controllers listen only to the MIDI channels of the respective slot.
Slots 1–16
Parameter Controller number Name
Volume #07 Volume
Pan #10 Pan
Mute - -
Solo - -
Send FX 1 #91 Effect 1 Depth
To Next Page
Loading...