Steinberg HALion Sonic 2 - Page 195

195
MIDI Controllers
Using MIDI Controllers
Ö You can remotely control any other parameter by assigning the parameter first to a
quick control and then to a MIDI controller.
Ö You can use MIDI controllers inside the modulation matrix of a synth or sample layer,
for example, to control the cutoff.
CC121 Support
HALion Sonic can be controlled with the AI knob of Steinberg’s CC121 MIDI
controller unit.
To change a parameter value, proceed as follows:
1. Move the mouse pointer over the control you want to change.
2. Turn the AI knob to set the value.
Ö Please note that the AI knob only works on parameters that are automatable. This
means, for example, that you cannot use the AI knob to change the parameters of the
Options page.
Layer 4 QC 3 - -
Layer 4 QC 4 - -
Layer 4 QC 5 - -
Layer 4 QC 6 - -
Layer 4 QC 7 - -
Layer 4 QC 8 - -
Parameter Controller number Name