66
Editing
The FlexPhraser
The phrases that can be found in the various other categories use a number of
different playback types to allow phrase specific user interaction while playing.
These phrases use one of the following playback types:
Mute
Activate the Mute button to stop playback of the phrase temporarily. The phrase will
still play in the background. When you deactivate Mute, playback resumes
immediately.
KS Off (Key Switches off)
Construction Set phrases that make use of key switches and noises usually work only
with programs for the same type of instrument. Programs without key switches and
noises would play back such events as normal notes that do not fit to the rest of the
phrase. To avoid the playback of key switches and noises, activate the KS Off option.
Ö Since this option filters out any note events that do not transpose with your playing,
drum phrases do not work when this option is activated.
Loop
Defines whether the phrase is played once or continuously in a loop. When this is
activated, the phrase plays in a loop.
Hold
With the Hold parameter, you can prevent the phrase from stopping or changing
when the keys are released. In addition, the Gated mode plays silently in the
background when you release the keys, and resumes playback at the current position
when you press the keys again.
You can select one of the following options:
Option Description
Playback of a drum
pattern
Pressing any note triggers the same rhythm pattern.
Playback only of the
played notes
The phrase is played back using only the played note and its
octave notes.
Playback of a
programmed
sequence according
to the played chord
Pressing only one note, the phrase is played back using the
programmed sequence — which means that notes other than the
ones you play are triggered. Adding notes to those already held,
changes the sequence accordingly — for example, the phrase
plays back according to the chord you play.
Option Description
Off The phrase changes immediately when releasing a key. The phrase
stops immediately when releasing all keys.
On The phrase plays to end even when the keys are released. When the
Loop option is activated, the phrase plays continuously in a cycle.
Gated The phrase starts playback with the first key being played. It plays
silently in the background even when the keys are released, and
resumes playback at the current position when you press any of the
keys again. This way, you can gate the playback of the phrase.
To Next Page
Loading...