79
Editing
Editing Drum and Loop Layers
• With a Resonance of 100 % you might hear clicks because the slice ends abruptly,
but the filter still produces a sound from self-oscillation. In such a case, go to the
corresponding FlexPhraser and reduce the Gate Scale until the clicks are gone. In
addition, you can adjust the amplifier envelope of the slices, for example, to
increase the release of the envelopes.
Apart from the Pitch, Cutoff, and Pan parameters, all other parameters correspond to
the parameters on the LFO pages for sample and synth layers. For a description of
these parameters, see
“The LFO Subpages” on page 50.
Pitch
This adjusts how much the LFO affects the pitch of the slices.
Cutoff
This adjusts how much the LFO affects the cutoff of the slices.
Pan
This adjusts how much the LFO affects the pan of the slices.
FlexPhraser for Loop Layers
When using loop layers, the FlexPhraser offers the following features:
Loop
This option defines whether the loop sequence is played once or continuously in
cycles. When activated, the loop sequence plays in cycles.
Hold
With Hold you can prevent the loop to stop or change when the keys are released. In
addition, the Gated mode plays silently in the background when you release the keys,
and resumes playback at the current position when you press the keys again.
You can select one of the following options:
Trigger Mode
The Trigger mode defines when the FlexPhraser scans for new keys you play on the
keyboard.
You can select one of the following options:
Option Description
Off The loop stops immediately when releasing a key.
On The loop plays to end even when the keys are released. When the
Loop option is activated, the loop plays continuously in cycles.
Gated The loop starts playback with the first key being played. It plays
silently in the background even when the keys are released, and
resumes playback at the current position when you press any of the
keys again. This way, you can gate the playback of the loop.
Option Description
Immediately The FlexPhraser scans for new keys all the time. The loop changes
immediately in reaction to your playing.
Next Beat The FlexPhraser scans for new keys upon new beats. The loop
changes in reaction to your playing on each new beat.
Next Measure The FlexPhraser scans for new keys upon new measures. The loop
changes in reaction to your playing on each new measure.
To Next Page
Loading...