86
Editing
Expression Maps
Remapped Mode
The Remapped mode allows you to transpose the fixed, internal key switch
assignments into the playable range of your MIDI keyboard. Each expression displays
the MIDI note of the internal key switch and a MIDI note for re-assigning the key
switch next to its name. The MIDI note of the internal key switch is for indication only
and cannot be edited.
To transpose the internal key switches, proceed as follows:
1. Set the mode to Key Switch.
2. Enter the MIDI note you want the expression to be reassigned to.
Ö The MIDI notes you use for key switches cannot be used to trigger samples anymore.
MIDI Controller Mode
The MIDI Controller mode allows you to define a MIDI controller that remotely controls
the internal key switches. The defined MIDI controller switches only between the
active expressions.
To assign a MIDI controller, proceed as follows:
1. Set the mode to MIDI Controller.
2. Open the menu again and select “Learn CC”.
3. Turn on the Hardware controller.
Temporary KS Mode
When you activate this option, expressions other than the default expression only
become active for as long as the corresponding key switch is held. This allows you to
“throw in” notes with other expressions by pressing a key switch temporarily. You
automatically return to the default expression when releasing this key switch.
Default Expression
This sets the default expression for Temporary KS Mode and the expression that will
be active after loading the program or layer.
To set the default expression:
1. Open the “Default Expression” submenu.
2. Select the expression you want to be the default.
To Next Page
Loading...