Stellar
®
EC6000 Telescopic Crane Owner’s Manual PN: 65779 | Page 9
HOLE MOUNTING DETAIL
FRONT
7.38
5.00
10.00
14.75
3.00
EC6000 Mounting Detail
TUBE 4X2X0.38
TRUCK FRAME
TUBE 4X2X0.38
3/8 PLATE
TUBE 2X2X0.38(TYP 4)
Flatbed Body Reinforcement
HOLE MOUNTING DETAIL
FRONT
7.38
14.75
5.00
10.00
Standard
Narrow
Base
If it has been determined that the destination body
won’t support the crane with a fully rated load, the
body must be reinforced. Use 1/4” fillet welds and
an AWS qualified welder to proceed as shown in
this drawing:
Note: Tubing must be
at least 4” x 2” x 0.38”
(Except where noted)
To Next Page
Loading...
