29
Flash File Menu
The K1 or K2 knobs allow the user to select Read Antenna File or Save User Antenna
File. The Select button selects highlighted item in RED.
Read Antenna File
Selecting this option will load a file from the Micro-SD card. This file can be a
1) master antenna file, 2) saved antenna file or 3) custom antenna file.
Master Antenna File
The master antenna file is stored in internal non-volatile memory. Antenna
select and default antenna data access this file to get the data for the
currently selected antenna. The Master Antenna File is loaded from the
compact flash card using Flash File menu. The file can be saved as an
antenna file or as the stepper supplied file that contains all versions of
antenna manufactured by SteppIR.
Saved Antenna File
A file that was created when using the Save User Antenna File menu.
Custom Antenna File
A custom antenna file is one that was created and saved by the user.
Save User Antenna File
Selecting this option will write current antenna data saved in internal EE-prom to
the Micro-SD card. The name will be automatically generated using current
antenna name. Example DB-42/80 antenna will generate a file named
DB4280.SAV. The controller will not check if file already exists. Hence, it will
overwrite any previously saved file with same antenna name.
To Next Page
Loading...