SteppIR SDA 2000 OptimizIR - Remote Driver Board Wiring

33
mounting plate for mounting the driver board in dry location out by the tower. This will also
act as a grounding plate and should be connected to a good ground.
Station ground
Controller
Data In/
Radio
Data
Out
PTT
CAT 5 cable
(provided)
Female-Felame
RJ-45 adapter
(provided)
Remote Driver Board
CAT 5 cable
(not provided)
Antenna
control
cable
24V PS
100-240 VAC
power
RJ-45
Remote Driver Board Wiring