STEYR 6 CYLINDER User Manual

Z001019/0_6_July 2008 Page ENGINE - 71
01 ENGINE
SERVICE MANUAL MARINE ENGINES
06.03 ill.1
06.03 ill.2
01.06.03 Replace rear radialshaft sealing ring
Preparation: Remove flywheel, refer 01.03
Remove radial shaft sealing ring
1 Mount special tool No. VR00107/0 to press in the rear
radial shaft sealing ring.
2 Press radial shaft sealing into rear built-in ring carrier
by means of special tool No. VR00107/0.
Assembly engine in reverse order.
ToC

STEYR 6 CYLINDER Specifications

General

Brand	STEYR
Model	6 CYLINDER
Category	Engine
Language	English