01 ENGINE
Page ENGINE - 86 Z001019/0_6_July 2008
SERVICE MANUAL MARINE ENGINES
01.13.04 Change oil filter
1 For 4 cyl. engines
Waiting time 30 min. after having stopped the engine.
NOTE: First suck off the motor oil. This
reduces the waiting time.
2 For 6 cyl. engines
Position (special tool No. VR 00132/0) oil collecting
pan below oil filter (ill.2).
3 Loosen the oil filter with oil filter wrench
No. 2300713/1 and unscrew by hand. Dispose the oil
filter acc. EPA-regulation.
4 Clean sealing surface of oil filter head.
5 Oil the seal of new oil filter and screw it onto oil filter
head until the seal easily rests against. Tighten the oil
filter with a 3/4 turn.
ATTENTION:Remove possible oil contaminations
from filter head and environment.
Do not forget to check engine oil level!
13.04 ill.1
13.04 ill.2
13.04 ill.3
ToC
To Next Page
Loading...
Need help?
General
