1.5
Safety checks
1.5.1
General safety checks
Fuel lines and connections.
No mechanical damage.
No leakage in the connections.
All screws tightened.
Drive the machine forwards/backwards and
release the drive/service brake pedal (the
right pedal).
The machine must stop within 15 me-
tres.
No unusual noise.
1.5.2
Electric safety check
The clutch/brake pedal not depressed.
PTO not activated.
The engine should not
start.
The clutch/brake pedal depressed.
PTO activated. (The control for the
implement lifter must be in floating
position in order for the power take-
start.
Engine running. PTO activated.
The operator leaves
the seat.
Control for implement lifter not in float-
ing position.
WORKSHOP MANUAL
TITAN
Chapter
1 - General instructions
EDITION
2018
Page
8