BT 1316
6.1 Tools, Servicing Aids
– Socket, T27x125 – 0812 542 2104
– Torque wrench – 5910 890 0302
– Screwdriver, T27x200 – 5910 890 2415
– Socket, 8 mm
– STIHL OH 723 press fluid – 0781 957 9000
6.2 Removing the Antivibration Elements
N Preparations, @ 3.1.
N Remove the handlebar, @ 5.2.
N Hold screws (1) steady and unscrew the nuts (5).
N Pull out the screws (1).
N Open the AV housing (2) and remove together with
tubes (6).
N Coat rubber buffers (3) and stops (4) in area of tubes
with press fluid.
N Pull off the rubber buffers (3).
N Pull off the stops (4).
6.3 Installing the Antivibration Elements
N Align tubes (6) so that the labels face up.
N Coat stops (4) and rubber buffers (3) with press fluid
before installing.
N Push the stops (4) onto the tubes (6).
N Push the rubber buffers (3) onto the tubes (6).
6 Antivibration System
2
2
2
5
3
4
3
4
2
6
6
M5x30 (4 Nm / 35 lbf. in.) 1
M5x30 (4 Nm / 35 lbf. in.) 1
M5x30 (4 Nm / 35 lbf. in.) 1
1 M5x30 (4 Nm / 35 lbf. in.)
4
3
2
2
2
5
2
4
3
0000-GXX-2678-A0
4
6
3
3
4
0000-GXX-2686-A0
To Next Page
Loading...