MS 194 T
English
37
The air filter system can be adapted to
suit different operating conditions by
installing different filters. Changing a
filter is accomplished quickly and simply.
The saw comes standard with either a
fabric filter or a fleece filter.
Fleece filter
For normal operating conditions and dry
work areas.
Fabric filter
For extremely cold operating conditions
(e.g. in powder or drifting snow or frost).
If there is a noticeable loss of engine
power
N Open the twist lock (1) in the
direction of the arrow.
N Remove the carburetor box
cover (2).
N Clean away loose dirt from around
the filter.
N Remove the filter.
N Knock out the filter or blow it clear
with compressed air from the inside
outwards.
N Always replace damaged filters.
If filter is caked with dirt:
N Wash the filter with STIHL universal
cleaner or in a clean, non-
flammable solution (e.g. warm
soapy water) and then dry.
NOTICE
Do not use a brush to clean the fleece
filter.
N Place the filter (3) in position.
N Fit the carburetor box cover.
Air Filter System Cleaning the Air Filter
To Next Page
Loading...
