Stihl MS 194 T - Maintenance and Repairs

MS 194 T
English
52
Users of this unit should carry out only
the maintenance operations described
in this manual. STIHL recommends that
other repair work be performed only by
authorized STIHL servicing dealers
using genuine STIHL replacement parts.
Genuine STIHL parts can be identified
by the STIHL part number, the
{ logo and, in some cases, by
the STIHL parts symbol K. The
symbol may appear alone on small
parts.
For repairs of any component of this
unit’s air emissions control system,
please refer to the air emissions
systems warranty in this manual.
Observe all country-specific waste
disposal rules and regulations.
STIHL products must not be thrown in
the garbage can. Take the product,
accessories and packaging to an
approved disposal site for environment-
friendly recycling.
Contact your STIHL servicing dealer for
the latest information on waste disposal.
STIHL Incorporated Limited Warranty
Policy for Non-Emission-Related Parts
and Components
This product is sold subject to the STIHL
Incorporated Limited Warranty Policy,
available at
www.stihlusa.com/warranty.html.
It can also be obtained from your
authorized STIHL dealer or by calling
1-800-GO-STIHL (1-800-467-8445).
A separate emissions control system
warranty is provided for emission-
related components.
Maintenance and Repairs Disposal
000BA073 KN
Limited Warranty