MS 194 T
English
49
Definitions
1 Carburetor Box Cover Twist Lock
Lock for carburetor box cover.
2 Carburetor Box Cover
Covers the air filter and the
carburetor.
3 Carburetor Adjusting Screws
For tuning the carburetor.
4 Control Handle
The support handle for the right
hand, located on the top of the saw.
5 Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
6 Master Control Lever
Lever for starting throttle, run and
stop switch position.
7 Throttle Trigger
Controls the speed of the engine.
8Chain Brake
A device to stop the rotation of the
chain. Is activated in a kickback
situation by the operator's hand or
by inertia.
9 Chain Sprocket
The toothed wheel that drives the
saw chain.
10 Chain Sprocket Cover
Covers the clutch and chain
sprocket.
11 Spark Plug Boot
Connects the spark plug with the
ignition lead.
12 Muffler with Spark Arresting Screen
Muffler reduces exhaust noises and
diverts exhaust gases away from
operator. Spark arresting screen is
designed to reduce the risk of fire.
13 Chain Tensioner
Permits precise adjustment of chain
tension.
14 Chain Catcher
Helps to reduce the risk of operator
contact by a chain when it breaks or
comes off the bar.
15 Guide Bar
Supports and guides the saw chain.
16 Oilomatic Saw Chain
A loop consisting of cutters, tie
straps and drive links.
17 Bumper Spike
Toothed stop for holding saw steady
against wood.
18 Fuel Filler Cap
For closing the fuel tank.
19 Oil Filler Cap
For closing the oil tank.
20 Hand Guard
Provides protection against
projecting branches and helps
prevent left hand from touching the
chain if it slips off the handlebar.
21 Front Handle (Handlebar)
Handlebar for the left hand at the
front of the saw.
22 Starter Grip
The grip of the pull starter, for
starting the engine.
23 Choke Lever
Eases engine starting by enriching
mixture.
24 Fuel Pump
Provides additional fuel feed for a
cold start.
25 Ring for Rope
Pull-out ring for attaching rope.
Guide Bar Nose
The exposed end of the guide bar.
(not illustrated, see chapter
"Tensioning the Saw Chain")
Clutch
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed. (not illustrated)
Anti-Vibration System
The anti-vibration system includes a
number of anti-vibration elements
designed to reduce the
transmission of vibrations created
by the engine and cutting
attachment to the operator's hands.
(not illustrated)
To Next Page
Loading...
