0478-131-3050-A
13
English
6 Docking Station and Power Supply Safety
￭ Stop and inspect the robotic mower for damage if it hits a
foreign object or exhibits unusual operating behavior,
such as abnormal vibration. After disabling the robotic
mower, inspect the cutting assembly (mowing blade,
blade shaft and blade mount). If the unit continues to
function abnormally, take it to an authorized STIHL iMow
servicing dealer for service before restarting and allowing
the robotic mower to operate.
￭ To reduce the risk of severe personal injuries from
unintentional starting:
￭ A damaged or loose mowing blade may vibrate, crack,
break or come off the robotic mower, which may result in
serious or fatal injury.
– Make sure the mowing blade is undamaged and
properly tightened before starting work.
– If the mowing blade loosens after being properly
tightened, stop work immediately and have the
robotic mower repaired by your authorized STIHL
iMow servicing dealer.
– Never use a robotic mower with a loose or damaged
mowing blade.
6.1 Introduction
This section contains the general safety warnings and
instructions prescribed for the docking station and power
supply. Additional important warnings and instructions are
provided in subsequent sections of this manual.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
WARNING
￭ When using the docking station and power supply, basic
safety precautions should always be followed to reduce
the risk of fire, electric shock and personal injury and
property damage, including the following:
1)READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2)Read and follow all instructions that are on the docking
station and power supply or provided with the docking
station or power supply.
3)Do not use an extension cord.
4)Reference the National Electrical Code, ANSI/NFPA 70,
specifically for the installation of wiring and clearances
from power and lighting conductors.
5)Installation work and electrical wiring must be done by
qualified person(s) in accordance with all applicable
codes and standards, including fire-rated construction.
6)Do not install or use within 10 feet of a swimming pool.
7)Do not use in a bathroom.
8)WARNING: Risk of Electric Shock. When used outdoors,
install only to a covered Class A GFCI protected
receptacle that is weatherproof with the power supply
connected to the receptacle. If one is not provided, contact
a qualified electrician for proper installation. Ensure that
the power supply and cord do not interfere with completely
closing the receptacle cover.
9)WARNING: Risk of Fire. Installation involves special
wiring methods to run wiring through a building structure.
Consult a qualified electrician.
10)WARNING: Not for use with receptacles that are
weatherproof only when the receptacle is covered
(attachment plug cap not inserted and receptacle cover
closed).
SAVE THESE INSTRUCTIONS – This manual contains
important safety and operating instructions for the STIHL
ADO 401 Docking Station and the OWA-60U-27VUSM
power supply.
– Never touch the mowing blade with your
hands, feet or any other part of your body
without first de-activating the machine.
Press and hold the STOP button for 5
seconds and confirm that the mowing
blade has stopped.
6 Docking Station and Power Supply
Safety
To Next Page
Loading...
