Stihl RMI 422 PC-L - Completing the Initial Installation and First; Mowing Operation; Installing the Perimeter Wire; Planning the Layout of the Mowing Area

0478-131-3050-A
34
English 11 Installing the Perimeter Wire
10.9 Completing the Initial Installation and First
Mowing Operation
WARNING
Inspect the mowing area. Just as you would before starting
a mowing operation with a traditional lawn mower, remove
all sticks, stones, pieces of metal, glass, wire or other
objects that could be thrown or flung by the cutting
attachment, damage the cutting attachment or cause
damage to property (e.g., parked vehicles, windows).
Remove objects from the mowing area such as toys, balls,
lawn furniture, landscape ornaments, flower pots, garden
hoses, lawn equipment and anything else that could impede
the proper operation of the robotic mower or become
entangled in its mowing blade.
► Complete the initial installation by pressing the OK button
on the control panel.
If you complete the initial installation during an active time,
the robotic mower will immediately begin to mow.
If you complete the initial installation outside an active time,
you can start a mowing operation by pressing the OK button
on the control panel.
► If you do not want the robotic mower to mow immediately,
select "No" and press the OK button on the control panel.
You can also start a mowing operation using the iMow App.
► Confirm by pressing the OK button on the control panel.
11.1 Planning the Layout of the Mowing Area
When planning the layout of the mowing area and placement
of the perimeter wire:
► Study the installation examples at the end of this
instruction manual, @ 26. Consider restricted areas,
corridors, secondary areas, search loops and reserve wire
in your planning to prevent or minimize the need for
subsequent re-routing and adjustment of the perimeter
wire.
► Determine the location of the docking station, @ 10.3.
► Remove obstacles from the mowing area and create
restricted areas as necessary, @ 11.6.
► Join all parts of the mowing area by planning and installing
corridors or secondary areas, @ 11.8 and @ 11.7.
► Plan search loops if you use the "Passage" function
("Offset Drive Home"), @ 11.9.
► Plan locations for reserve wire at several points to make it
easier to subsequently adjust or modify the path of the
perimeter wire, @ 11.13.
0000-GXX-3372-A0
11 Installing the Perimeter Wire
Start App
0000-GXX-7721-A0