Stihl RMI 422 PC-L - Settings; Settings Overview; Imow Settings

0478-131-3050-A
55
English 15 Settings
15.1 Settings Overview
The Settings menu contains 5 submenus, displayed as
buttons:
Robotic mower
Installation
Safety
Service
Dealer area
15.2 iMow Settings
Rain Sensor
To set the rain sensor:
► Press the navigation pad to the left or right. The current
value is displayed by means of a line diagram.
Mowing Time
Delay
Status Screen
To set the status screen:
► Select the left or right part of the screen using the
navigation pad and confirm your selection by pressing OK.
► For each part of the display, select one of the following to
appear on the status screen:
15 Settings
Select this submenu to change the robotic mower's
settings, @ 15.2.
Select this submenu to change and test the
installation, @ 15.3.
Select this submenu to change the security settings,
@ 15.4.
Select this submenu to confirm replacement of the
mowing blade. This will reset the internal blade
replacement counter. Also select this submenu to find
a wire break, @ 15.5.
This code-protected submenu is accessible only by
your authorized STIHL iMow servicing dealer.
Adjust the sensitivity of the 5-stage rain sensor.
Select this option to allow mowing at higher moisture
levels. If the bar is moved all the way to the left, the
robotic mower will mow even when it is raining.
Select this option to allow mowing under ordinary
ambient conditions.
Select this option to allow mowing only at lower
moisture levels. If the bar is moved all the way to the
right, the robotic mower will only mow if the rain
sensor is completely dry.
Set the default mowing time for the duration of a
mowing operation when activating automatic mowing
with the "Start mowing" command, @ 14.3.
Set the length of the delay when activating the "Start
time-delayed mowing" command, @ 14.3.
You can edit the status screen to display the
information you want to appear, @ 13.2.
Charging status: The battery charging status in
percent will appear on the status screen.
Rem. time: The remaining mowing duration during
the current week will appear on the status screen.
Time and date: The current date and current time will
appear on the status screen.
Start time: The start of the next planned mowing
operation will appear on the status screen. During a
running active time, the text "active" will be displayed.