42
English / USA
TS 400
The cut-off machine can be mounted on
the STIHL cut-off machine cart without
any difficulty whatsoever.
The cart makes it very much easier to
work with the cut-off machine and is an
indispensable aid when
– repairing damaged carriageway
pavements
– applying carriageway markings or
– cutting expansion joints.
* see "Guide to Using this Manual"
Together with the infinitely variable
cutting depth gauge wheel (special
accessory), the cut-off machine cart
ensures accurate, straight cut edges
and a constant cutting depth accurate to
within a millimetre, particularly when
working with diamond abrasive wheels.
For periods of three months or more.
: Drain and clean the fuel tank in a
well ventilated place.
: Dispose fuel properly in accordance
with local environmental
requirements.
: Run the engine until the carburetor
is dry. This helps to prevent the
carburetor diaphragms sticking
together.
: Remove the abrasive wheel.
: Thoroughly clean the machine,
paying special attention to the
cylinder fins and air filter.
: Store machine in a safe and dry
place, out of reach of children and
other unauthorized persons.
STIHL cut-off machine cart*
338BA036
Storing the machine
To Next Page
Loading...
