Manual lowering
– Pull and hold the manual lowering switch
(2). The forks will lower to the minimum
height until they stop by themselves.
CAUTION
Before lifting a load, make sure that it has been prop-
erly laid out on the pallet and that its weight does not
exceed the rated load capacity of 1200 kg.
CAUTION
Make sure that the forks are completely under the
load before the vehicle moves off.
Creep speed switch
– Keeping the handle in the vertical position,
simultaneously press the drive switch (4)
and the creep speed switch (5); the truck
will reduce its speed to 20% of the maxi-
mum speed.
Operation
4
Drive system
60 5001 801 1505 EN - 12/2019
To Next Page
Loading...
