Safety 2
Emissions
Vibrations
The vibrations of the machine have been
determined on an identical machine in ac-
cordance with the standards DIN EN 13059
"Safety of industrial trucks - Test methods
for measuring vibration" and DIN EN 12096
"Mechanical vibration - Declaration and verifi-
cation of vibration emission values".
Frequency-weighted effective value of accel-
eration on the seat
MSG 65 driver's seat
Measurement
uncertainty
< 0.71 m/s
2
0.177 m/s
2
Tests have indicated that the amplitude of the
hand and arm vibrations on the steering wheel
or on the operating devices in the truck is less
than 2.5 m/s
2
. There are therefore no mea-
surement guidelines for these measurements.
The personal vibration
load on the driver over
a working day must be det
ermined by the
operating company at t
he actual place of use
in accordance with Dir
ective 2002/44/EC,in
order to consider all a
dditional influences,
such as driving route,
intensity of use etc.
NOTE
Please note the definition of "operating com-
pany" in the sense of responsible persons!
174
749 EN - 03/2017 53
To Next Page
