SatLink VSAT User Guide
Publication no. 101557
Copyright © 2009 – STM Group, Inc.
Page 160 (160)
The STM SatLink VSAT can report the following Receiver State status:
Off
Tuning transponder one
Tuning transponder two
Tuning transponder three
Waiting for NIT (transponder one)
Waiting for PAT (transponder two)
Waiting for PMT (transponder two)
Waiting for RMT (transponder two)
Waiting for PAT (transponder three)
Waiting for PMT (transponder three)
Waiting for DVB RCS Tables/NCR Lock
Forward link up
Tuner lock lost
If the Forward Link acquisition proceeds normally and is successful, the CLI output message when typing
dvb rx show will not normally display the receiver states Tuning … and Waiting for … as the
acquisition is performed so quickly that the states have already passed.
If the Forward Link acquisition fails or comes to a stop, however, the Receiver State status (obtained by
issuing the
dvb rx show CLI command) will display the current stage in the acquisition process.
To Previous Page
Loading...
