SatLink VSAT User Guide
Publication no. 101557
Copyright © 2009 – STM Group, Inc.
Page 62 (160)
Example:
# ip nat static add 10.10.2.1 192.168.0.10
# ip nat show
NAT Configuration
-----------------
Network Address Port Translation (NAPT): Enabled
Global Address Table
If IP Address
dvb0 10.10.1.10
Static NAT Map
If Global Address Local Address
dvb0 10.10.2.1 192.168.0.10
Static NAPT Map
If Global Address/Port Local Address/Port
dvb0 10.10.2.2/5000 192.168.0.12/3000
NAT Status
----------
Total Sessions 0
Active Sessions 0
Failed Sessions 0
Packet Translations 0
To Next Page
Loading...
