S800A GNSS Receiver – User Manual 14
3. Field Surveying
3.1 Static Surveying
3.1.1 Static Surveying Introduction
Static Surveying is an GPS positioning measurement by installing three or
more GNSS receivers at different measuring stations to measure
simultaneously so as to get the relative positions of measuring stations.
Scope of application:
• the establishment of national geodetic control network (second or the
following class)
• the establishment of precise engineering control network, such as
bridges measurement, tunnel measurement
• the establishment of various densified control network, such as city
measurement, mapping control point measurement, road measurement
and boundaries location.
• GPS measurements including control survey used for mapping, cadastral
surveying, land information, real estate surveying, geophysical
prospecting, surveying and building construction in small and medium-
sized cities and towns, which should meet the accuracy demand of D or
E class GPS measurement.
To Next Page
Loading...
