Stonex S850
+
GNSS Receiver – User Manual 12
Is possible to convert the raw data files (*.dat) in Rinex format by pressing Convert. The Rinex format can be
changed as well as the compression format. If Antenna Phase Center is selected, the height in the Rinex will be
the one of the Antenna Phase Center. If Download is selected the Rinex files will be downloaded automatically
at the end of the conversion.
For every raw data file is showed the start time and the end time, the name, the size of the file, and its set
antenna height. By pressing Edit, is possible to change the file name, point name, antenna height, and
measurement type.
It’s possible to manage the log files also by accessing the record folder in the internal memory of the device
from a PC.
To Next Page
Loading...
