Stonex S850
+
GNSS Receiver – User Manual 22
3.5.2.6 WIFI Master
S850
+
has a basic internal caster, to work as a standalone base.
The caster address and port cannot be changed. Mountpoint, User and Password can be changed.
The default values are:
• Mountpoint: serial number of the device
• User: admin
• Password: pass
To receive the corrections from this base, the NTRIP Client must connect to the S850
+
WiFi hotspot
identified by its serial number (like for connecting to the WebUI). The NTRIP Client settings are:
• IP address: 192.168.10.1
• Port: 9100
• Mountpoint: same as the one set for the base
• GGA Upload: not necessary
• User: same as the one set for the base
• Password: same as the one set for the base
To Next Page
