Stonex S850
+
GNSS Receiver ā User Manual 4
2. Receiver appearance
2.1 Front view
Flashing red: position not calculated
Flashing green: position calculated without a fixed solution
Green: fixed solution
Flashing green and red alternately: GNSS board abnormal
Green: datalink setting success
Flashing green: data in normal transmission
Flashing yellow: raw data recording, flashing frequency according to the
sampling interval
Green: active Wi-Fi connection, master, or client
Off: no Wi-Fi connection
Blue: connected
Off: no Bluetooth connection
Green: charge level between 30% and 100%
Flashing green: charge level between 10% and 30%
Flashing red: charge level lower than 10% with a warning beep
Device off while charging:
Green: charge completed
Red: in charge