Application
Instructions for use • S-PILOT
®
• PYB194_EN_V1.0_02-2021_IFU_CE-MDR 27
5. Make sure that the tube end of the Y-adaptor not required is closed.
6. Connect the other end of the tube set to the trocar or directly to the shaver handpiece
using a LUER lock fitting.
7. Press the tube squeeze valve switch again to close the tube squeeze valve.
To prevent the cavity from collapsing, the suction flow can be adjusted at any time via
the roller clamp attached close to the patient.
Fluid and smoke gas can be suctioned simultaneously via the Y-adaptor.
To Next Page
Loading...
